This document outlines the user manual for a Libratone TRACK+ earphone, covering its functions, usage, and maintenance features. The manual begins with a table of contents, guiding users through various sections such as App Download, Button and Interface Instruction, Bluetooth Connection, Basic Operation, Status Indication, CityMix® Smart, Plus 1, and FAQ.

Button and Interface Instruction:

The earphone features a control panel with several buttons and an indicator light.

Function Button (1): This button serves multiple purposes, including power on/off and Bluetooth pairing.
Volume Down Button (2): Used to decrease the volume.
Play/Pause Button (3): Controls music playback and call management.
Volume Up Button (4): Used to increase the volume.
Charging Port (5): The port for charging the earphone.
Indicator Light (LED) (6): Provides visual feedback on the earphone's status.

Bluetooth Connection:

To connect the Libratone TRACK+ earphone via Bluetooth:

Power On: Long press the Function Button (1) for 1 second until the LED lights up.
Enter Bluetooth Pairing Mode:
- During the first run, the earphone automatically enters Bluetooth pairing mode, indicated by a fast blink of the white LED.
- If the earphone is powered off, press and hold the Function Button for more than 3 seconds to enter Bluetooth pairing mode.
Select Product: On your phone, find and select "Libratone TRACK+" from the Bluetooth device list.
Connected: Once connected, the LED will blink twice, indicating that the TRACK+ is ready to play.

Basic Operation:

The earphone offers a range of basic operations:

Function Button (1):
- Short press: Adjusts the CityMix® noise cancelling level.
- Double press: Activates Ambient Monitoring, which lowers music volume to allow you to hear your surroundings. Double press again to return to the previous state.
- Long press (1s): Powers the earphone on or off.
- Long press (3s, when powered off): Enters Bluetooth pairing mode.
Volume Down (2) / Volume Up (4): Adjusts the audio volume.
Play/Pause Button (3):
- Short press: Plays or pauses music, and answers or ends phone calls.
- Double click: Skips to the next track.
- Triple click: Skips to the previous track.
- Long press: Enables the voice assistant or rejects an incoming call. (Note: Voice assistant functionality is dependent on your device supporting it and being connected via Bluetooth.)

Status Indication (LED):

The Indicator Light (LED) provides important status information:

White LED blinking: Bluetooth pairing mode is active.
Red LED blinking: Firmware update is in progress.
Triple blink of red LED: Indicates an error or something is wrong.
White LED solid on: The earphone is charging.
Red LED (when low battery): The LED turns red when the battery is low.
LED off: The earphone is fully charged.

CityMix® Smart:

CityMix® Smart on/off: This feature can be enabled or disabled within the Libratone App.
Automatic Adjustment: When CityMix® Smart is enabled, the earphone automatically adjusts its noise cancelling levels based on the user's surroundings and motion, providing an optimized listening experience.

Plus 1 (Setup):

The "Plus 1" feature allows for connecting multiple Libratone earphones.

Setup: To set up Plus 1, open the Libratone App, navigate to the earphone page, and click the 'PLUS 1' icon at the bottom. Follow the on-screen instructions to complete the connection.

Enjoy (Synchronous Playback):

Once multiple earphones are connected via Plus 1, you can play music synchronously across all connected earphones, enhancing the shared listening experience.

FAQ (Frequently Asked Questions):

Playback is interrupted?
- The typical working distance for the earphone is 10 meters in an open, non-sheltered area. If the distance to the playing device exceeds 10 meters, music playback may be interrupted.
The earphone cannot connect to the phone paired before.
- If you encounter connection issues, delete the earphone from your phone's Bluetooth device list. Then, press the Function button for 2 seconds to enter Bluetooth pairing mode and re-pair with your phone.
I have two phones, and want to connect both to Track+.
- If the earphone has been previously paired with both phones, simply select the earphone from the Bluetooth device list on the phone you wish to connect.
The earphone will automatically power off if no operation/playback is detected.
- By default, the earphone will automatically power off after 30 minutes of inactivity (no operation or playback) to conserve battery. This auto-power-off duration can be customized via the Libratone App.

General Note:

This user manual uses a phone as an example for operation instructions, but the procedures are applicable to any Bluetooth-enabled device, including tablets and computers.

LIBRATONE Track+ - Select Product; Connected

Related product manuals