12
2. With the brush provided, clean any head lice and eggs
that might be caught between the teeth of the comb. Fill
a bowl or sink, about 10 cm deep, with hot (not boiling) tap
water and only submerge the combing head.
DO NOT SUBMERGE THE MAIN BODY OF THE
V-COMB, IT WILL CAUSE DAMAGE TO THE DEVICE.
Remove from water and dry thoroughly. Do not shake the
combing head as it may damage the valve.
Do not insert anything into the
back of the combing head or
hold it under running water. This
will damage the valve.
Maintaining the V-Comb
1. After treatment, switch off and unplug the V-Comb
from the power source. Remove the combing head
from the main body by disassembling the unit. Detach
the capture lter carefully, replace the V-Comb capture
lter lid to the capture lter and dispose of properly.
DO NOT USE BOILING WATER TO CLEAN THE
V-COMB AS IT WILL DAMAGE THE UNIT. Ideal water
temperature is be between 70 - 80°C.
To Next Page
Loading...
