Liebert 8 Tons - System Weights; Equipment Inspection Upon Receipt; Figure 3 System Configurations-Chilled Water Systems; Table 4 Unit Weights

Site Preparation and Installation
7
Figure 3 System Configurations—chilled water systems
2.2 System Weights
2.3 Equipment Inspection upon receipt
When the unit arrives, do not uncrate equipment until it is close to its final location. All required
assemblies are banded and shipped in corrugated containers. If you discover any damage when you
uncrate the unit, report it to the shipper immediately. If you later find any concealed damage, report
it to the shipper and to your Liebert supplier.
Table 4 Unit weights
Cooling Units* lbs kg
MMD96E 665 302
MMD95E 665 302
Condensing Units lbs kg
MCD96A 530 241
MCD95A 530 241
MCD98W 470 213
MCD97W 470 213
*Add 40 lbs. (20 kg.) to units with free cooling or hot water reheat coils.
Evaporator
Condensate Pump
Evaporator
Condensing
Unit
Condensate Pump
COUPLED COMPONENTS
(AIR-COOLED SYSTEM
CHILLED-WATER SYSTEMS