Need help?Do you have a question about the Life Fitness 8500 3 and is the answer not in the manual?
General| Type | Home Gym |
|---|---|
| Model | 8500 3 |
| Brand | Life Fitness |
| Exercises | 40+ |
| Frame Material | Steel |
| Number of Exercises | 40+ |
Loosely assemble the leg and press weight stack bases to the main base.
Attach front and rear uprights and the top boom to the base structure.
Securely assemble the floating pulley stop and seat support.
Securely assemble the bearing housing and center pulley bracket to the front upright.
Securely assemble a spring pin to the Wolff sleeve and attach the U-pin.
Securely assemble the press base to the main base and rear upright.
Securely assemble the press frame to the press base.
Slide hinge tabs onto the Wolff sleeve and attach the press back pad.
Loosely assemble the press arm adjust to the rear upright.
Securely assemble the press arm to the press arm adjust.
Securely assemble the rear base leg to the leg frame.
Assemble weight stacks by sliding plates onto guide rods.
To Next Page