Life Fitness G5/FIT 1.0 CM User Manual

CLASS - H,S
PART # 7822601 REV. B
VERSION: LFG5/FSFCM1-SHR-101
DATE: 06-15-05
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
WT. STACK SHROUD FOR
G5/FIT 1.0 CM
USER GUIDE

Life Fitness G5/FIT 1.0 CM Specifications

General

Brand	Life Fitness
Model	G5/FIT 1.0 CM
Category	Home Gym
Language	English

Summary

User Guide

Important Safety Information

Before Use and General Safety

Read warnings, get medical exam, keep clear of moving parts, and do not modify machine.

Machine Condition and Weight Pin Safety

Inspect for damage, ensure weight pin is fully inserted, never prop plates.

Cable, Pin, and Access Safety

Inspect cables and pull pins; keep children and pets away.

Parts and Tools

Components List

Lists all parts with item numbers, quantities, part numbers, and descriptions for the weight stack shroud.

Required Tools

Specifies the necessary tools for assembling the Life Fitness weight stack shroud.

Assembly Instructions

Step 1: Disassemble and Prepare

Disassemble cable ends, remove top cover and shroud, and remove weight plates.

Step 2: Remove Weight Plate Assembly

Remove the entire weight plate guide assembly and discard specific cap screws.

Step 3: Install Shroud and Brackets

Slide shroud into machine, place bottom shroud bracket, and re-install weight guide assembly.

Step 4: Secure Top Shroud and Cables

Secure top shroud with screws, re-install cable and cable end, and slide weight plates back.

Step 5: Final Shroud and Cover Installation

Install second shroud, tighten all shrouds and brackets, and re-install top cover.

Maintenance and Purchase Information

Maintenance Recommendations

Guidelines for cleaning, inspecting equipment daily, and lubricating guide rods.

Customer Purchase Details

Section to record product model, serial number, purchase date, and dealer information.

Limited Warranty

International Offices