Life Fitness INTEGRITY INTDX User Manual (English)

Other manuals for Life Fitness INTEGRITY INTDX

Questions and Answers:

M
Mary SmithAug 15, 2025
How to troubleshoot no power on my Life Fitness INTEGRITY INTDX Treadmill?
- K
  Katherine WellsAug 15, 2025
  If your Life Fitness Treadmill isn't getting power, first ensure the ON/OFF switch is in the ON position. Then, plug the treadmill into an appropriate circuit; in North America, use a dedicated 20 amp circuit for Commercial Units or a 15 amp circuit for Consumer Units. Verify power at the outlet using a voltmeter; if there's no power, reset the circuit breaker. Also, check that the line cord is properly seated in the socket at both the wall outlet and the machine. If the line cord is damaged, contact Life Fitness Customer Support to replace it.
A
Austin BlairAug 18, 2025
What to do if my Life Fitness INTEGRITY INTDX resets randomly or pauses?
- M
  Marilyn MorrisAug 18, 2025
  If your Life Fitness Treadmill unit resets randomly or pauses, ensure it's plugged into an appropriate circuit; in North America, use a dedicated 20 amp circuit for Commercial Units or a 15 amp circuit for Consumer Units. Inspect the power connection at the electrical outlet and the machine to ensure it's properly seated. Re-engage the emergency stop magnet. Move any obstructions off the display console and handlebar. If the ground prong on the line cord is damaged, replace the line cord.
P
Paul HardinAug 21, 2025
Why my Life Fitness Club Series unit has no power?
- W
  Wesley ThomasAug 21, 2025
  For Club Series units, the console may be in 'Energy Saving Mode'. To wake the console, step on the treadmill or push the green 'Go' button. A beep will sound when successful.
A
Amber RobinsonAug 25, 2025
Why does the display not illuminate on my Life Fitness Treadmill?
- L
  longkyleAug 25, 2025
  If the display on your Life Fitness Treadmill does not illuminate when powered on, check all electrical connections for proper attachment at the AC outlet and line cord, the line cord at the treadmill, the power switch, all console connections, and all lower electronics connections. If issues persist, contact Life Fitness Customer Support.
A
awolfAug 27, 2025
Why is the maximum speed reduced on my Life Fitness INTEGRITY INTDX Treadmill?
- M
  Mrs. Andrea Reed DDSAug 27, 2025
  If the maximum speed of your Life Fitness Treadmill is reduced, make sure users are not pushing the striding belt in either direction.
C
cmedinaAug 30, 2025
What to do if the striding belt slips off-center on Life Fitness INTEGRITY INTDX Treadmill?
- P
  Penny LeonardAug 30, 2025
  If the striding belt slips off-center on your Life Fitness Treadmill, check the levelers and level the treadmill. Also, check the striding belt and re-tension it as necessary.
B
bryanpotterSep 2, 2025
Why are heart rate readings abnormally elevated on Life Fitness INTEGRITY INTDX Treadmill?
- G
  gbrownSep 2, 2025
  If you're experiencing abnormally elevated heart rate readings on your Life Fitness Treadmill, it might be due to electromagnetic interference from devices like television sets or antennas. Try moving the treadmill a few inches away from the source of interference, or vice versa, until the heart rate readings become accurate.
G
Gary EvansSep 5, 2025
What to do if heart rate reading is erratic or absent on Life Fitness INTEGRITY INTDX Treadmill?
- W
  William FrancisSep 5, 2025
  If the heart rate reading on your Life Fitness Treadmill is erratic or absent, make sure the belt transmitter electrodes are sufficiently wet. Ensure the belt transmitter electrodes are lying flat against the skin. Wash the belt transmitter with mild soap and water. Setup of the belt transmitter is accomplished by initially bringing it with in 1 foot of the receiver, which is in the console. After the heart rate is displayed on the console the range is extended to 3 feet. If the chest strap battery is depleted, contact Customer Support Services for instructions on how to have the chest strap replaced.
C
Craig ChanSep 8, 2025
How to stop rubbing sound from underneath Life Fitness INTEGRITY INTDX?
- C
  cody65Sep 8, 2025
  If you hear a rubbing sound coming from underneath your Life Fitness Treadmill, power down the unit and disconnect AC power. Inspect underneath the striding belt and machine. Remove any debris or objects that may be causing interference.
J
jennifer91Sep 12, 2025
What to do if my Life Fitness equipment has no power?
- D
  danamonroeSep 12, 2025
  If your Life Fitness equipment has no power, start by checking the power outlet with a voltmeter. If there's no power, reset the circuit breaker. Also, inspect the power connection at both the wall outlet and the machine to ensure it's properly seated. If the line cord is damaged, it should be replaced.

Life Fitness INTEGRITY INTDX Specifications

General

Maximum User Weight	400 lbs (181 kg)
Heart Rate Monitoring	Contact and wireless telemetry
Running Surface	60" x 22" (153 cm x 56 cm)
Elevation	0% - 15%
Speed	0.5-12 mph (0.8-19.3 km/h)
Rollers	3.5" (9 cm) precision crowned rollers
Power Requirements	120V, 15A dedicated circuit