To Next PageTo Next Page
Need help?Do you have a question about the Lifebreath RNC series and is the answer not in the manual?
General| Series | RNC |
|---|---|
| Airflow Capacity | 50-200 CFM (depending on model) |
| Voltage | 120V |
| Material | Galvanized steel |
| Mounting Type | Wall or Ceiling |
| Warranty | 5 years (limited) |
Introduction to the 2-speed electronic HRV models.
Precautions for safe and proper installation.
Hazards related to electrical shock during installation.
Key considerations for successful installation.
Information on potential specification changes.
Explains HRV function, energy recovery, and benefits.
Details on different operational modes for ventilation.
How the dehumidistat controls indoor humidity.
Definitions of terms and manual references.
Information on the HRV warranty coverage.
Key features, setting fan speed, modes, and dehumidistat.
How to use the 20/40/60 minute timer function.
Guide to the four selectable operating modes.
How to sync the humidity sensor with other devices.
Operation of the RNC Ventilation Control (99-BC-01).
Operation of the RNC Dehumidistat (99-DH-01).
Initiates high speed ventilation for set durations.
Initiates high speed ventilation for 20 minutes.
Inspect hoods and clean air filters.
Steps for cleaning the core and installing filters.
Cleaning fans and motor care.
Airflow, efficiency, temp recovery, and physical size.
Details on port setup and internal airflow.
Airflow, efficiency, temp recovery, and physical size.
Airflow, efficiency, temp recovery, and speed adjustment.
Airflow, efficiency, temp recovery, and physical size.
Airflow, efficiency, temp recovery, and physical size.
Airflow, efficiency, temp recovery, and speed adjustment.
Airflow, efficiency, temp recovery, and physical size.
Diagrams for horizontal installation.
Diagrams for vertical installation.
Basic installation method drawing air from return duct.
Drawing air from specific rooms.
Standalone system, separate ducts.
Guidelines for efficient ductwork installation.
Essential considerations for simplified installation.
Essential considerations for partial installation.
Essential considerations for full installation.
Guidance on choosing a suitable mounting space.
Steps for hanging the unit using provided straps.
Attaching hanging straps for different orientations.
Using L-brackets for wall mounting considerations.
How to properly connect the drain line and P-trap.
Guidance on grilles for air distribution and balancing.
Pre-drywall installation fitting for grilles.
Fitting for running ducts through wall studs.
Fitting for installation into drywall.
Fitting for ceiling tiles or finished drywall.
Connecting flexible ducting to weatherhoods and ports.
Requirements for fresh air intake hood location.
Requirements for stale air exhaust hood location.
Step-by-step guide for installing the main control unit.
How to operate and set lockout mode for digital timers.
Wiring instructions for mechanical timers.
Connecting HRV to furnace or air handler blower.
Modifying operation to standby vs. fully-off.
Connecting timers or dry contacts directly to the unit.
Critical reasons for balancing HRV airflows.
Tools for measuring airflow, like magnehelic gauges.
Pre-balancing checks and setup.
Method for measuring airflow in ducts.
Formula and examples for determining CFM.
Using door ports for airflow measurement.
Tables for reading airflow based on pressure.
Performance data for Hi 3 speed setting.
Performance data for Hi 2 speed setting.
Performance data for Hi 1 speed setting.
Description of installed and required dampers.
Available kits for measuring and balancing airflow.
Diagnosing and fixing problems with airflow.
Addressing high/low humidity and window condensation.
Solutions for frost or ice formation.
Identifying causes of water in the unit or drain pans.
Diagram of electrical connections for the RNC120D.
Wiring for RNC95, RNC10, RNC20, RNC155 models.
Diagram of electrical connections for the RNC200.
Diagram of electrical connections for the RNC5-TPD.
Fields for contractor to complete post-installation.
