To Next PageTo Next Page
Need help?Do you have a question about the Lifebreath RNC5-TPD and is the answer not in the manual?
General| Brand | Lifebreath |
|---|---|
| Model | RNC5-TPD |
| Category | Heating System |
| Language | English |
Provides a caution regarding installation and compatibility with other mechanical equipment.
Details critical warnings about preventing electrical shock and proper grounding.
Highlights key attention points for completing installation and wiring.
Lists performance metrics including airflow, recovery, and efficiency for the RNC155.
Lists performance metrics including airflow, recovery, and efficiency for the RNC10.
Lists performance metrics including airflow, recovery, and efficiency for the RNC20.
Lists performance metrics including airflow, recovery, and efficiency for the RNC120D.
Details the simplified installation diagram, key points, duct sizing, and damper requirements.
Illustrates partially dedicated installation drawing stale air from specific home areas.
Depicts a fully dedicated system drawing stale air from home areas and supplying fresh air to living areas.
Step-by-step instructions for suspending the HRV unit using provided hanging straps.
Instructions for connecting the condensate drain, including P-trap and sealing.
Specifies minimum distances and height requirements for intake and exhaust weatherhoods.
Step-by-step guide for mounting the control's back plate and connecting wires.
Explains why balancing air flows is critical and the consequences of imbalance.
Details the step-by-step process for measuring airflow using a pitot tube.
Addresses symptoms like poor airflow, cold supply air, and their potential causes and solutions.
Covers issues related to high/low humidity, condensation, and frosting.
Details the layout of the electrical control panel and its components for the RNC120D.
Shows the electrical control panel, motor, and auto-transformer wiring for various RNC models.
Details the electrical control panel and motor wiring connections specific to the RNC200 model.
Illustrates the electrical control panel and motor wiring for the RNC5-TPD model.
