LifeFitness E5 - User Manual

Questions and Answers

S
Shannon BraunAug 16, 2025
Why is the wireless heart rate not working on my LifeFitness E5 Elliptical Trainer?
- M
  michelle50Aug 17, 2025
  There are several reasons why the wireless heart rate might not be working on your LifeFitness Elliptical Trainer: * The wireless heart rate may be turned OFF in the Settings Menu. To resolve this, enter the Settings Menu and verify that WIRELESS HR is turned ON. * There may be poor contact between the telemetry heart rate strap and your skin. Ensure good contact. * Electrical interference from appliances or fluorescent lights can interfere with the telemetry heart rate strap. Try moving the Elliptical Trainer to a different location or moving electrical appliances away from it. * The battery in the Heart Rate Telemetry Strap may need to be replaced. The battery is a CR2032 (3V).
D
destiny96Aug 19, 2025
What to do if my LifeFitness E5 has no power?
- M
  Melissa ThomasSep 12, 2025
  If your LifeFitness Elliptical Trainer has no power, try the following: * Check that the power cord is fully plugged into both the back of the Elliptical Trainer and the wall. * Ensure the power cord is fully seated in the back of the trainer. * You may be in “Energy Saver Mode”. Press the “Energy Saver” button to see if the console turns on. * Verify that all customer assembly connections are working properly by unplugging and re-plugging each connection. Check for pinched cables.
K
Kimberly MartinAug 22, 2025
What to do if “OFF” is displayed in the LEVEL window on my LifeFitness E5 Elliptical Trainer console?
- M
  Monique BrownAug 22, 2025
  If “OFF” is displayed in the LEVEL window on your LifeFitness Elliptical Trainer console: * First, turn the unit off and then on again. * If power cycling the product does not work, there is a problem with the resistance system.
A
Andrew MillerAug 25, 2025
How to fix loose total body arms on LifeFitness E5 Elliptical Trainer?
- W
  Willie CruzAug 26, 2025
  If the Total Body Arms on your LifeFitness Elliptical Trainer feel loose: * Remove the moving arm pivot covers and check that the bolt holding the total body arm in place is fully tightened. * If the arms still feel loose, disassemble them and ensure all the correct hardware from the assembly instructions was used.
K
kevinturnerAug 27, 2025
What to do if errors are displayed in the Activity Zone on my LifeFitness Elliptical Trainer? (E5)
- G
  Gregory HuberAug 27, 2025
  If errors are displayed in the Activity Zone on your LifeFitness Elliptical Trainer, turn the unit off and then back on again to reset the Activity Zone.
S
Stacy BlakeAug 30, 2025
Why does the Activity Zone display strange information on my LifeFitness Elliptical Trainer? (E5)
- J
  John AriasAug 30, 2025
  The Activity Zone on your LifeFitness Elliptical Trainer may display strange information because you have accessed the Settings Menu or Diagnostics Menu. Press the Leg Sculptor key continuously until the menu is exited.
E
Edward FlemingSep 1, 2025
What does it mean when “STRIDE” is blinking on my LifeFitness Elliptical Trainer? (E5)
- M
  Mark HollandSep 2, 2025
  When “STRIDE” is blinking on your LifeFitness Elliptical Trainer, it means your Duty Cycle is on, which prevents Over Actuation.
M
Matthew WaltersSep 4, 2025
What to do if Activity Zone display settings won’t work on LifeFitness Elliptical Trainer? (E5)
- M
  mcarterSep 4, 2025
  If the Activity Zone display settings won’t work on your LifeFitness Elliptical Trainer, it means you have accessed the Settings Menu. To exit the Settings Menu, press the Leg Sculptor key until you have exited.
S
Samuel LiuSep 7, 2025
Why can't I save my workout on the USB stick on my LifeFitness E5 Elliptical Trainer? (Track+ Console)
- A
  arnoldkathySep 7, 2025
  If you receive the message “UN-ABLE TO SAVE SEE MANUAL” when trying to save a workout on the USB stick on your LifeFitness Elliptical Trainer (Track+ Console): * The console may not have recognized the USB stick. Try unplugging the USB stick and plugging it back in. * The USB stick may be full. * The USB stick may not be compatible with the product. Try using a different USB stick.
D
Derek LandrySep 10, 2025
Why is my iPod not charging in Energy Saver mode on my LifeFitness E5 Elliptical Trainer? (Track+ Console)
- M
  Mark WilliamsSep 12, 2025
  Your iPod will not charge if your LifeFitness Elliptical Trainer (Track+ Console) enters Energy Saver mode. This is normal.