LifeFitness LIFECYCLE - Using the Settings Menu; Units Setting; Set Time and Time Zone; Beeps Setting

32
8.3 HOW TO USE THE SETTINGS MENU
The Settings menu can be accessed by pressing the SETTINGS key at the “Select Workout” screen. Upon entering the
Settings menu, the screen will display “SETTINGS MENU”.
• Scroll through the console setting options using the Left/Right arrows.
• Adjust setting items with the Up/Down arrows.
• Use the ENTER key or left/right arrow to save modifications and move to the next option.
• Use the RESET key to exit the settings menu.
The settings and selection options are listed below.
• Units
Changes the unit of measure for speed and distance.
Displays “Units”.
Selection options are: English and Metric.
• Set Time
Set the date and time plus the time zone for workout tracking on the Life Fitness Virtual Trainer website. Date
and time are your local time. Time Zone is based on your location compared to Greenwich Mean Time.
Major Cities
Time Zone Values
London 0
New York City -4 Time is only used for Virtual Trainer data transfer
Chicago -5 through the USB or App.
Los Angeles -7
Hong Kong +8
Berlin +2
• Beeps
Turns ON or OFF audio feedback.
Displays “Beeps”.
Selection options are: On and Off.
• RPM
Displays “RPM = OFF”.
Selection options are On and Off.
• Contrast
Changes the contrast of the display.
Displays “Contrast = XX”.
Selection options are: 1-99.
• Brightness
Changes the intensity of the display backlight LEDs.
Displays “Brightness =X”.
Selection options are 1-10.
• Heart Rate Telemetry
Turns ON and OFF the telemetry heart receiver.
Display “WIRELESS HR = ON”.
Selection options are: On and Off.
• Statistics – press ENTER to select
“Total Hours” (total number of hours the product was used in a workout)
“Total Miles” (number of miles that the product was used for)