Lifepro AllevaRed Pro - Operating Instructions; Treat Your Calves; Treat the Soles of Your Feet; Treat Your Arms

OPERATING INSTRUCTIONS
TREAT YOUR CALVES
1. Sit on a sofa with your legs up or sit on the floor.
2. Wrap the belt around your calf. Adjust the Velcro
®
strap until the belt
is snug.
3. Turn on the AllevaRed Pro and treat one calf at a time.
TREAT THE SOLES OF YOUR FEET
1. Sit down on a sofa or chair.
2. Place the AllevaRed Pro on the floor with the LEDs facing up.
3. Place your clean feet on the AllevaRed Pro.
4. Turn on the AllevaRed Pro and treat both feet while seated.
WARNING: Do not stand on the belt, as this could damage the LEDs.
TREAT YOUR ARMS
1. Sit down on a sofa or chair.
2. Wrap the belt around your upper arm or forearm. Adjust the Velcro
®
strap until the belt is snug. You may need to hold the belt in place to
keep the belt from sliding off if your arm is slender.
3. Turn on the AllevaRed Pro and treat one arm at a time.
TROUBLESHOOTING GUIDE
Quickly troubleshoot simple issues you might experience with the
AllevaRedPro Light Therapy Belt using the table below.
Please contact a customer support representative for additional assistance
at: support@lifeprofitness.com or (800) 563-6604. Please do not attempt
to repair the therapy belt.
ISSUE POSSIBLE REASON HOW TO RESOLVE
DEVICE IS NOT
WORKING
Device is not plugged in.
Connect the remote control
cable to the belt. Connect the
power adapter to the remote
control cable. Plug the power
adapter into a wall outlet.
Device is not turned on.
Press the On/Pulse/Off
button once to turn on the
AllevaRedPro.
DEVICE STOPPED
WORKING
SUDDENLY
Device automatically
shuts off after the set
working time.
Turn the AllevaRedPro on to
begin a new red light therapy
session.
INTENSITY IS
NOT OPTIMAL
The intensity selected is
not optimal.
Press the Intensity button to
choose a different intensity from
the five options, L0–L4.
VIBRATION IS
NOT OPTIMAL
The vibration level
selected is not optimal.
Press the Vibration button to
choose a different vibration
intensity from the five levels,
S1–S5. You may turn vibration
off by selecting S0.
PULSED LIGHT IS
NOT ON
Pulsed light setting is
not selected.
Press the On/Pulse/Off button
to once turn on the belt. Press
a second time to turn on the
pulsed-light feature.
14 AllevaRed Pro User Manual Lifepro
Wellness Recovery Collection 15