10 RevitaGlow Pro User Manual Lifepro
Wellness Recovery Collection 11
SECURING THE MASKS
ATTACHING THE VELCRO STRAPS TO THE FACE AND NECK MASKS
1. Locate the three pairs of Velcro
®
straps.
a. Each pair has one “hook” strap (with stiff plastic hooks) and one
“loop” strap (with soft, fuzzy loops).
b. One pair of straps will attach to the mask behind your head and the
other will attach to the mask across the top of your head.
2. Attach the first pair of
straps to the face mask:
a. Insert the square end of
one strap through a slot
in the side of the face
mask and fold the end
over to secure the strap.
b. Insert the second strap
through the other slot
in the side of the face
mask and secure it in
the same manner.
c. Make sure the two
straps can be attached
(the hooks and loops
should face each other).
3. Attach the second pair of
straps to the face mask:
a. Insert the square end of
one strap through one
slot in the top edge of
the face mask and fold the end over to secure the strap.
b. Insert the square end of the second strap through the second slot in
the top edge and secure it in the same manner.
4. Attach the final pair of straps to the neck mask in the same manner.
a. The straps insert through the slots in the side of the mask.
b. Make sure the two straps can be attached (the hooks and loops
should face each other).
SECURING THE FACE MASK TO YOUR HEAD
1. Place the mask on your face with the LEDs facing your skin.
2. Fasten the straps at the sides of the mask behind your head.
3. Fasten the straps on the top edge of the mask across the top of your
head.
4. Make sure the mask is snug to your face, but not too tight. Readjust
the straps if necessary.
SECURING THE CHEST MASK TO YOUR NECK
1. Place the neck mask on your chest with the LEDs facing your skin.
2. Fasten the straps at the sides of the mask behind your neck. Make sure
the mask is snug but not too tight.
To Next Page
Loading...
