13
1
2
3
Installing or replacing an activated
carbon filter tap
The activated carbon filter incorporated
into the tap housing is made of high
specification activated carbon which
reduces a broad spectrum of chemical
residues including pesticides, endocrine
disrupting compounds, medical residues
and heavy metals.
The activated carbon filter is incorporated
into the tap housing. This is not designed
to be removed. Attempting to do so will
damage the carbon.
• Empty the jerrycan of water.
1
• Unscrew & remove tap cap and tap.
2
• Insert your new activated carbon lter
tap into the tap cap and thread onto
the jerrycan. Ensure that the tap cap is
tightened firmly.
3
After any long trip and or when storing
LIFESAVER
®
jerrycan the activated
carbon tap filter should be removed and
discarded and replaced with the standard
tap provided. Only replace with a new
activated carbon filter tap immediately
before your next trip.
Activated Carbons
You only need to fit a LIFESAVER
®
jerrycan activated carbon filter tap when
you suspect that the water may contain
chemical contamination. In most water
courses this is generally not the case.
Retain your original tap for future use.
MAINTENANCE AND CARE
To Next Page
Loading...
