15
TECHNOLOGY
FAILSAFE™ technology
There are several aspects of this
technology that increase the safety and
reliability of your LIFESAVER
®
jerrycan.
Auto Shut Off
As the LIFESAVER
®
cartridge nears the
end of its service life a greater and greater
number of pumps are required to induce
water to flow. There will come a point at
which despite continuous pumping water
does not flow. DO NOT confuse this with
the level of water getting low within the
jerrycan. Try changing the orientation as in
1
&
2
to improve the flow.
If changing the orientation does not
improve the flow and there is still plenty of
water in the jerrycan then this is the auto
shut off feature of FAILSAFE™ working.
Your cartridge has now expired and you
must now change it. Before changing
however, perform a front side wash as
the membranes may just be covered with
particulate matter. (Front-side washing -
page 10).
Integrity check
This integrity check should be performed
on a regular basis and every time the
jerrycan has been subjected to shock or
you suspect damage may have occurred
for any reason to the jerrycan or cartridge
membranes.
MAINTENANCE AND CARE
1
2
To Next Page
Loading...
