EasyManua.ls Logo

Lifescan ONETOUCH DELICA User Manual

Lifescan ONETOUCH DELICA
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AW 06755101A
Lancing Device / Dispositivo de punción /
Stylo autopiqueur
Read me first!
Quick Start Guide
¡Lea esto primero!
Guía rápida de uso
À lire en premier!
Guide de démarrage
1. Remove cap
Retire la tapa
Retirez le capuchon
Refer to the OneTouch® Delica® Lancing Device Insert for
complete instructions.
Consulte el prospecto del dispositivo de punción
OneTouch® Delica® para obtener instrucciones completas.
Reportez-vous à la notice du stylo autopiqueur
OneTouch® Delica® pour les instructions complètes.
2. Insert lancet*
Inserte una lanceta*
Insérez la lancette*
*Use a new, sterile lancet each time
you test.
*Utilice una lanceta nueva y estéril
cada vez que realice una prueba.
*Pour chaque test, utilisez une
nouvelle lancette stérile.
3. Remove and save lancet protective cover
Retire y guarde la cubierta protectora de la lanceta
Retirez et conservez le couvercle protecteur
de la lancette
5. Adjust depth setting
Ajuste la configuración de profundidad
Ajustez le réglage de la profondeur
6. Cock device
Trabe el dispositivo
Armez le stylo autopiqueur
4. Replace cap
Vuelva a colocar la tapa
Remettez le capuchon
Do Not overtighten.
No ajuste en exceso.
Ne serrez pas
excessivement.
Delica
®
Question and Answer IconNeed help?

Do you have a question about the Lifescan ONETOUCH DELICA and is the answer not in the manual?

Lifescan ONETOUCH DELICA Specifications

General IconGeneral
BrandLifescan
ModelONETOUCH DELICA
CategoryBlood Glucose Meter
LanguageEnglish

Summary

Using the OneTouch Delica Lancing Device

Remove Cap

Instructions for removing the protective cap from the lancing device before inserting a lancet.

Insert Lancet

Procedure for inserting a new, sterile lancet into the lancing device.

Handle Lancet Protective Cover

Guidance on removing and saving the lancet's protective cover.

Replace Cap

Instructions for replacing the cap onto the lancing device after inserting the lancet.

Adjust Depth Setting

How to adjust the lancing device to the desired depth setting.

Cock Device

Steps to cock or prime the lancing device before use.

Puncture Finger and Squeeze

Procedure for puncturing the fingertip and gently squeezing it.

Remove Cocking Cap

Instructions for removing the cap after the device has been cocked.

Insert Lancet into Cover

How to push the used lancet tip into its protective cover.

Eject Lancet

Procedure for safely ejecting the used lancet.

Replace Final Cap

Instructions for replacing the final cap onto the device after use.

Related product manuals