USING THE MONITOR WITH AC ADAPTER
The UA-789 has an AC adapter jack to allow you to supply power
from an outlet in your home. The UA-789 monitor is only compatible
with the included LifeSource AC Adapter (part # TB-235). The use
of any other AC adapter may damage your UA-789 monitor and will
void your warranty.
Connecting the AC adapter to the monitor:
Gently insert the AC adapter plug into a 120V AC outlet.
2. Connect the AC adapter plug into the jack on the right side
of the monitor.
Disconnecting the AC adapter from the monitor:
Turn the unit off by pressing the START button.
2. Disconnect the plug from the jack of the monitor quickly.
3. Gently remove the AC adapter from the power outlet.
(LifeSource part # TB-235)
To Next Page
Loading...
Need help?
General
