E-11
LifeSource Health Line (Toll-Free): 1-888-726-9966
NOTE: This device stores the last 90 measurements in memory. The data is
retained as long as the batteries are in the device. When you remove the
batteries or the batteries are drained, the data will be erased.
1. Press and hold the START button.
2. The average data of all the measurements
and the number of measurements stored
are displayed.
The memory data is displayed starting
from the most recent. After the last
reading is displayed, the monitor
automatically shuts off.
Clearing the memory data
3. Press and hold the MEMORY button
until the “ ” (memory) mark blinks to clear the stored data.
ABOUT MEMORY
Press and hold the
START button
Averaged Systolic
Averaged Diastolic
Number of Readings
Average of all readings
THIS DOESN'T WORK
To Next Page
Loading...
Need help?
General
