4342
Personal Settings
Follow the steps below to make changes to the Personal Settings options.
Con guration Steps Information Displayed
Press and hold STOP and then SPEED + for 3 seconds to
enter Personal Settings Mode. The rst screen shows the
software version for your console.
Press ENTER to continue
Engineering Mode
10 49
15
17. 7.2014
Press SPEED +/- to turn Intell-Guard™ on and o .
Press ENTER to continue
Intelli-Guard On or O
Roller Size is displayed. (Do not modify)
Press ENTER to continue
Roller
600
Press SPEED + / - to change from English (EN) to Metric
(SI).
Press ENTER to continue.
Select the units
EN or SI
Press Speed +/- to turn Calendar on or o .
(Do not modify)
Press ENTER to continue
Set Calendar On or O
Press SPEED +/- or to turn Energy Saving mode on or o .
Press ENTER to continue
Electricity On or O
This screen shows the Total Distance exercised in miles
or kilometers.
Press ENTER to continue
Total Distance
0 000
This screen shows Total Hours of use.
Press ENTER to continue
Total Hours
0 000
Press SPEED +/- to set the amount of Pause Time
required before the treadmill resets. The options in
seconds are 90,180, 300 or O .
Press ENTER to continue
Select the pause time
90, 180, 300 or O
Press Speed +/- to turn Audible Beep on or o .
Press ENTER to continue
Beep On or O
Press SPEED +/- Resume Speed allows the treadmill to
start at the speed it was running when paused. (If set to
0, the treadmill will start at .5 mph. If set to 1, the tread-
mill will start at the pre-paused speed.)
Press ENTER to return to normal console operations
Resume Speed 0 or 1
Controls whether the warm up/cool down feature is
enabled. (Applies to TR4000i model only.)
Warm / Cool On or O
Personal Settings
The TR2000e, TR3000e and TR4000i all come with the ability for you to person-
alize several console settings including:
Intelli-Guard™ - This feature is triggered when the treadmill senses you are
no longer walking or running. For safety purposes it automatically pauses
the belt to avoid accidental falls resulting in possible injury. There are several
factors that a ect the accuracy of this feature including your walking style,
weight and usage characteristics. While we don’t recommend it, this feature
can be turned o if required.
English or Metric - Used for both Speed and Distance in miles or kilometers
shown on the display.
Calendar - Date and Time are shown on the display readouts, but can be
turned o with this setting. We recommend you keep date and time turned
on to accurately track your results.
Energy Savings - Turn the Energy Saving feature on or o .
Pause Time - The number of seconds the treadmill will pause before going
into sleep mode. This feature can also be turned o entirely.
Audible Beep - Turns o the audible alert that beeps for speed and incline
changes or when the treadmill is starting or stopping.
WARNING: The audible alert is turned on from the manufacturer to warn the
user that the treadmill is starting or the speed is changing. Turning this alert
o is done at the sole discretion of the user.
Resume Speed: This lets you start the treadmill at the speed it was going
when paused.
Warm up / Cool down: On the TR4000i, the warm up/cool down feature
defaults to ON. If you would prefer to never see this feature, set this setting
to OFF.
!
To Next Page
Loading...
