Lifestyle Solutions HARRINGTON User Manual

Place the left armrest as shown below, insert the metal plates on the
armrest to the one on the chaise body.
Ensure it is correctly in place.
8 of 8
Rev.10282016
TOLL FREE 877-693-8866 LIFESTYLE SOLUTIONS
HARRINGTON
11
If you want to place loveseat on left side and chaise on right side,
please follow the leg positions as shown below when assembling the
item.
12
Metal plate
on armrest
Metal plate
on chaise
Optional leg for
added support
Optional leg for
added support

Lifestyle Solutions HARRINGTON Specifications

General

Brand	Lifestyle Solutions
Model	HARRINGTON
Category	Indoor Furnishing
Language	English

Summary

Parts and Hardware

Assembly Steps

Unpack and Prepare Parts

Carefully unpack parts and hardware from storage onto a clean flat surface.

Assemble Loveseat Base

Place loveseat body, backrest, and armrest, securing legs and washers.

Position Assembled Loveseat

Carefully lift and turn assembled parts onto their legs.

Connect Loveseat Armrest

Insert metal plate on loveseat backrest to the armrest while lifting.

Prepare Back Cushions

Unzip back cushion covers and insert cushions flat.

Secure Back Cushions

Fasten back cushions using the zipper pin/box until fully secured.

Assemble Chaise Base

Place chaise body and backrest, securing legs and washers.

Position Assembled Chaise

Carefully lift and turn assembled chaise parts onto their legs.

Secure Chaise Back Cushion

Secure the back cushion by locating and fastening the open-ended zipper pin/box.

Connect Chaise to Loveseat

Lift chaise and insert its metal plates into the loveseat body's metal plates.

Attach Left Armrest

Place left armrest and insert metal plates onto the chaise body.

Position Loveseat and Chaise

Place loveseat on left and chaise on right, following leg positions.