Lifestyle Solutions QUEEN SIZE

Need help?

Do you have a question about the Lifestyle Solutions QUEEN SIZE and is the answer not in the manual?

Summary

Product Overview and Safety

General Warnings and Usage

Critical safety instructions, intended use, and handling precautions for the bed frame.

Parts Inventory

Visual identification and quantity of all components included in the package.

Hardware and Tools List

Detailed enumeration of all fasteners, tools, and hardware needed for assembly.

Bed Frame Assembly Steps

Step 1: Attach Legs to Headboard

Securing the legs to the upholstered headboard component.

Step 2: Install Threaded Rods in Headboard

Inserting threaded rods into the designated holes of the headboard.

Step 3: Connect Headboard to Side Rails

Attaching the headboard to the side rails using bolts, washers, and nuts.

Step 4: Secure Headboard Attachment Points

Finalizing the connection of the headboard to the bed frame structure.

Step 5: Attach Legs to Support Bar

Fastening the legs to the central support bar component.

Step 6: Position Support Slats

Arranging the bed slats on the support frame for mattress placement.

Step 7: Connect Side Rails to Footboard

Joining the side rails to the footboard section of the bed frame.

Step 8: Attach Support Frame to Headboard

Connecting the assembled support frame to the main headboard structure.

Step 9: Assemble Side Rail Supports

Preparing the side rail support beams for attachment to the frame.

Step 10: Attach Side Rail Supports to Frame

Securing the side rail support beams to the main bed frame.

Step 11: Connect Center Support Rails

Joining the two central support rails together.

Step 12: Secure Center Support Rails

Fastening the connected central support rails to the frame.

Step 13: Attach Slats to Frame

Mounting the bed slats onto the assembled frame structure.

Step 14: Final Tightening of Slats

Ensuring all slats are securely fastened to the bed frame.

Step 15: Place Slats onto Supports

Positioning the wooden slats onto the support structure of the bed frame.

This document is an assembly instruction manual for a Queen Size bed frame.

Function Description:

The device is a Queen Size bed frame designed to support a mattress and accommodate two average adults for sleeping. It is intended for home use and not for commercial purposes. The bed frame provides a sturdy structure for a mattress, ensuring stability and comfort for users.

Important Technical Specifications:

Size: Queen Size
Capacity: Designed for two (2) average adults.
Components: The bed frame consists of several parts, including a headboard (Part 1 and Part 2), side rails (Part 3), a footboard (Part 4), legs (Part 5), a center support beam (Part 6), side support rails (Part 7), and wooden slats (Part 8).
Hardware: The assembly requires various hardware components:
- Allen Key M5 (A): 1 PC (1 spare)
- Spanner 14mm (B): 1 PC
- Threaded Rod M8 x 50mm (C): 5 PCS (1 spare)
- Bolt M8 x 40mm (D): 3 PCS (1 spare)
- Bolt M8 x 25mm (E): 12 PCS (pre-assembled, 1 spare)
- Bolt M8 x 20mm (F): 8 PCS (pre-assembled, 1 spare)
- Nut M8 (G): 5 PCS (pre-assembled, 1 spare)
- Washer M8 x Φ20 (H): 5 PCS (pre-assembled 20 PCS, 1 spare)

Usage Features:

Assembly Required: The bed frame requires assembly by the user following the provided step-by-step instructions.
Two-Person Assembly Recommended: The manual recommends that two people handle the assembly, with an additional person being even better for ease and safety.
Safety Precautions:
- Jumping on the bed frame is prohibited to prevent injury and damage.
- Children under the age of 5, small infants, and babies should not sleep alone on this product for safety reasons.
Intended Use: Specifically designed for home use.

Maintenance Features:

No Specific Maintenance Instructions: The manual does not detail specific maintenance procedures. However, as an assembly guide, it implies that proper assembly is key to the longevity and stability of the product.
Contact for Parts/Assistance: In case of missing or damaged parts, users are instructed to call a toll-free customer service line (866-626-7826) and have the assembly manual ready for prompt and reliable service. This indicates a support system for parts replacement.
Keep Instructions: Users are advised to read and keep the instruction booklet for future reference, which is useful for reassembly, troubleshooting, or identifying parts.

Assembly Process Overview:

The assembly process is broken down into 15 steps:

Step 1: Attach legs (Part 5) to the footboard (Part 2).
Step 2: Attach threaded rods (C) to the headboard (Part 2) and secure legs (Part 5) to it.
Step 3: Connect the headboard (Part 1) to the headboard base (Part 2) using spanner (B), nuts (G), and washers (H).
Step 4: Finalize the headboard assembly.
Step 5: Attach legs (Part 5) to the footboard (Part 4).
Step 6: Assemble the center support beam (Part 6).
Step 7: Attach the footboard (Part 4) to the headboard (Part 1/2) using bolts.
Step 8: Connect the center support beam (Part 6) to the headboard and footboard using Allen key (A).
Step 9: Assemble the side support rails (Part 7).
Step 10: Attach the side support rails (Part 7) to the headboard and footboard using Allen key (A) and bolts (D).
Step 11: Connect the side rails (Part 3).
Step 12: Secure the connected side rails (Part 3) with bolts.
Step 13: Attach the assembled side rails (Part 3) to the headboard (Part 1) and footboard (Part 4).
Step 14: Secure all connections of the side rails to the headboard and footboard using Allen key (A).
Step 15: Install the wooden slats (Part 8) onto the bed frame.

The manual concludes with an "INSTALLATION COMPLETE" image showing the assembled bed frame and a "FUNCTION" image showing the bed frame with a mattress, illustrating its intended use.