Lifetime 1533 - Page 30

30
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
v (x2)
AAX (x2)
ABP (x4)
6 5/8”
(Not actual length)
!$' (x2)
,AYTHE"ACKBOARDAND2IMASSEMBLYNEXTTOTHE0OLEASSEMBLY2EST
the Rim on cardboard to prevent scratching. Then secure the Extension
Arms (AKC) to the Pole Assembly with the hardware shown.
SEC

AAX
AAX
ABP
ABP
ABP
ABP
!$'
!$'
AKC
AKC
CAUTION: HAVE ONE ADULT HOLD THE BACKBOARD IN PLACE
UNTIL THIS STEP HAS BEEN COMPLETED!
Note: Tighten the 1/2” Centerlock Nuts (AAX) until they are fl ush with the end of the Bolts. Make
sure all hardware is securely tightened before moving to the next section.
!