Lifetime 1533 - Page 29

29
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
v (x2)
ABB (x1)
7!2.).'
Do not operate the system without the Outer Guard in
PLACEOVERTHE$UNK,ATCH$OINGSOCOULDINCREASE
the risk of injuries described on Page Three. If the
Outer Guard becomes loose or detached, call our
Customer Service Department.
,IFTTHE$UNK,ATCH"$, and /UTER'UARD"$. so the slots line up with
the holes in the upper Extension Arms (AKC) that are closest to the
"ACKBOARD!*)4HENSECURETHE$UNK,ATCHAND/UTER'UARDTOTHE
upper Extension Arms with the hardware shown.
SEC

ABB ABA
BDN
AKCAKC
!*)
Note: Tighten the 3/8” Centerlock Nut (ABB) until it is fl ush with the end of the Bolt.
!
(Not actual length)
ABA (x1)
6 1/2”
BDL