2
REGISTER YOUR LIFETIME PRODUCT TODAY!
There are benefi ts to registering your Lifetime product. With our new online product registration form, it’s fast and
easy! Register with us at www.lifetime.com and enjoy these great benefi ts:
• Receive exclusive money-saving offers from BuyLifetime.com, our online store, as well as NEW product
notifi cations and special closeout promotions!
• In the unlikely event of a product recall or safety modifi cation, we will notify you immediately and directly.
• Registering your product guarantees you immediate warranty service. If you do not register your product,
your warranty rights will not be diminished. But you will need to provide a sales receipt to verify your product
purchase date before warranty service will be provided.
Lifetime’s Promise to You:
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not
sell or provide your personal data to other third parties, or allow them to use your personal data for their own
purposes.
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
Surface must be leveled before installation. We recommend building a level work space with a cement or patio style
surface. If the surface is not properly leveled, the Outdoor shed will not assemble correctly. Proper surface leveling
will save you time in the long run, so please do not ignore this step.
Consult all local building codes, as well as city and county ordinances, to ensure that the construction of the
Outdoor Shed does not require a building permit. Proper building permit documentation may be required in your
neighborhood, and it would be unfortunate to learn this after constructing the Shed.
There is a 1/2” Phillips head screwdriver bit included with the shed hardware. This bit can be used with any
power screwdriver or drill. The plastic pieces of your shed can be damaged by overtightening of screws. To avoid
damage we strongly recommend the use of a low-powered power screwdriver or a drill that has an adjustable
clutch that is set on a low torque setting. If neither is available, use a hand screwdriver. In any case use caution to
avoid overtightening the screws.
Sharp objects may damage your fl oor. If resting sharp, heavy objects on your shed fl oor, place a block of wood
between the sharp object and fl oor.
MODEL #6418
Lifetime
8’ x 5’ Outdoor Shed
INSTRUCTION #1038534 B 7/01/2008
®
Level Surface Notice
Building Code Notice
Screwdriver Notice
Floor Puncture Notice
SAFETY INSTRUCTIONS
Most injuries are caused by misuse and/or not following instructions. Use caution when using this shed.
To ensure safety, do not attempt to assemble this shed without following the instructions carefully.
Check entire box and inside all packing material for parts and/or additional instruction material.
Before beginning assembly, read the instructions and identify parts using the hardware identifi er
and parts list in this document. Proper and complete assembly, use and supervision are essential
for proper orientation and to reduce the risk of accident or injury.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
• Do not use or store hot objects such as grills, blowtorches, welding equipment, etc. in the
shed.
• If using a ladder during assembly, use extreme caution.
• Two capable adults are required for shed assembly. (It is also recommended that a third adult function
as an instruction reader.)
To Next Page
Loading...
Need help?
General
