Lifetime 71546 - Page 30

30
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Insert the 4.86” U-Bolt (BNP) through the upper part of the opening on the
CBDLTJEFPGUIF#BDLCPBSE"+* as shown.
SEC
3.4
Connect the Rim (ALX) and Plastic Guard (ALD) to the #BDLCPBSE"+* with the
hardware shown. Thread the w+BN/VUT""7 all the way down on the
6#PMU 0OUIFVOEFSTJEFPGUIF#BDLCPBSEQMBDF.38” x 1” Steel Spacers
(ACS) onto the 5/16” x 2 1/2” Tap Bolts (ABG), and secure the 5/16” Nylock
'MBOHF/VUT"#,onto the Tap Bolts.
SEC
3.5
1/2”
ACSY
ABKY
AAVY
"+*
BNP
ABK
Underside View
ABK
ACS
ALD
AAV
AAV
ALX
"+*
ABG