Liftkar PTR I 16
WARNING
Never move on stairs with an inclination of more than 35° and during operation the handle unit
must always be held with both hands.
Always move on stairs at an angle of 90° (length of tracked stairclimber to steps).
The integrated angle sensor (angle LED) is designed merely as an indicator and does represent
a safety feature.
4.2.3 REACHING THE TOP STEP
Stop the tracked stairclimber as soon as the „STOP“- marks on the side
have reached the edge of the top step (figure 3).
Now gradually tilt the tracked stairclimber back until the tracks rest on
the floor of the landing. Press the activation button again. The tracked
stairclimber then finishes moving onto the landing.
4.2.4 MOVING DOWN
Position the tracked stairclimber at an angle of 90° to the stairs so that
the passenger is facing the stairs. Use the direction selector switch on
the handle unit display to select “DOWN” (figure 4). LED flashes green.
Hold the handle unit securely with both hands and press the activation
button to move the tracked stairclimber towards the stairs until the
“STOP” mark on the side reaches the edge of the top step. Stop the
tracked stairclimber and, using both hands, tilt the handle unit forward
until the stairclimber tracks rest on the steps. Then press the activation
button to continue moving down the stairs.
WARNING
Before operating the tracked stairclimber it must be at an angle of 90° to the stairs.
4.2.5 SAFETY CHECK
Although the tracked stairclimber is equipped with an angle warning
LED, we recommend checking the precise inclination of the stairs before
climbing them for the first time.
4.3 REMOVING THE WHEEL CHAIR
3
4
5
To Next Page
Loading...