Maintenance
Service interval
Before
starting
Every 300 hours
or yearly
Hydraulic oil A B
Hydraulic filter A B
A = Inspection, adjustment or refilling
B = Replacement
Motor
Refer to technical data in the motor manual.
Hydraulic Oil Filter
When the filter gauge needle remains in the red sector (while the powerpack is running
and the oil is warm), the filter must be replaced. The old filter is removed by turning it
clockwise (use a filter strap wrench if necessary). Tilting the powerpack rearwards will
minimise oil spill. Before mounting the new filter, it is recommended to grease the sur-
face of the seal with oil in order to ease correct tightening of the filter.
Hydraulic Oil
It is recommended to exchange the hydraulic oil after one year of operation or if the oil
becomes contaminated with water (the oil has a milky appearance). Drain off the oil by
disconnecting the drain plug from below the oil tank.
To Next Page
Loading...