Introduction and Description
This manual is intended to provide operation and service information necessary for safe
and efficient use of the hydraulic powerpack LIFTON LP 8 E Electro-Pack.
Hydraulic powerpacks are of course subject to wear with service life dependent on
maintenance and severity of operation. It is therefore important to observe the following
before attempting to use the LIFTON powerpack.
Operation and service other than in accordance with the instructions given may subject
the powerpack to conditions beyond the design capability, which may result in system
failure or personal injury.
1. Before attempting to use the powerpack, carefully read the entire operating
manual and warranty conditions.
Special attention should be paid to the section “Safety Precautions”.
2. Read the operating manual for the powerpack engine.
3. Read the operating manual for the connected tools.
4. Make sure that the powerpack is correctly sized for the tool.
LIFTON LP 8 E is a hydraulic powerpack designed for the operation of LIFTON hand-
held breakers and other hydraulic tools with an oil flow of 20 l.p.m. (EHTMA Category C).
Year of manufacture: See the ID-tag.
To Next Page
Loading...