Lifton LP 8 E - Page 3

Technical Data LIFTON LP 8 E
Measures (HxWxL)....................................................................... 585x525x680 mm
Weight Incl. oil .............................................................................................70 kg
Noise Sound pressure level 1 m (ISO 11203) ................................ L
PA
= 81 dB
Emission Measured sound power level (2000/14/EC)...........................L
WA
= 91 dB
Guaranteed sound power level (2000/14/EC)......................L
WA
= 104 dB
Construction Chassis/tank ........................................... Combined welded steel section
with integrated fan housing, epoxy powder coated
Frame .........................Welded stainless steel tube with foldable handles
Wheels............................................................ 230 mm solid rubber tyres
Hydraulics Flow............................................................................................20 l.p.m.
Variable by means of internal by-pass valve
Pressure relief valve ........................................Set at 140 bar, adjustable
Nominal pressure ........................................................................ 120 bar
Type .....................................................................................Open centre
Pump ................. Gear pump, directly driven from the engine crank shaft
by means of flexible coupling
Oil tank capacity ............................................................................ 5 litres
Oil level gauge.................................... Automatic low-level engine cut-off
Filtration........................................................... 25 Micron return line filter
Return line filter by-pass in valve block
Filter indicator .......................................................Return line filter gauge
Cooling system ................. Thermostatically controlled air blast oil cooler
Motor ......... Three-phase asynchronous a.c. motor, bipolar, 3 x 400 V, 5.5 kW