LIGHT MY BRICKS 10317 User Manual

TROUBLESHOOTING 52
Troubleshooting
In order for Light My Bricks components to fit
in between and underneath LEGO
®
bricks, the
components need to be very small. Due to this
nature, Light My Bricks components can be
easily damaged when not handled correctly.
Be careful when removing unpacked
components out of the packaging and ensure
not to forcibly pull at the wires as this can
damage the soldering that attach the wires to
the LEDs.
If the wiring is detached from the LED itself, the
light will not operate.
When connecting lights to your LEGO
®
set, check that there are no pinched wires
underneath or in between bricks and plates.
When the wires are pinched and the exposed
wires are touching each other, this can cause
a crosswire and the lights to not function
correctly.
Check Your Wires
LEGO
®
LAND ROVER CLASSIC DEFENDER 90 10317 LIGHT KIT INSTALL GUIDE

LIGHT MY BRICKS 10317 Specifications

General

Brand	LIGHT MY BRICKS
Model	10317
Category	Lighting Equipment
Language	English