What to do if LIGHT MY BRICKS LEGO Assembly Square 10255 Lighting Equipment has a short circuit?
If there is a short circuit in your LIGHT MY BRICKS Lighting Equipment, which can be caused by damaging the pins or incorrect insertion of connectors, DISCONNECT POWER IMMEDIATELY.
Why forcibly inserting connectors in the incorrect direction damages LIGHT MY BRICKS LEGO Assembly Square 10255 Lighting Equipment?
Forcibly inserting connectors in the incorrect direction of your LIGHT MY BRICKS Lighting Equipment causes damage to the pins inside each of the ports. Check carefully that the connectors are inserted in the correct direction.
General| Brand | LIGHT MY BRICKS |
|---|---|
| Model | LEGO Assembly Square 10255 |
| Category | Lighting Equipment |
| Language | English |
Guide on properly routing cables between and under LEGO bricks without damage.
Instructions on correctly inserting cable connectors into expansion board ports to avoid damage.
Details on connecting cable connectors to strip lights, emphasizing correct orientation.
Guidance for connecting micro cables to micro expansion board ports, ensuring proper alignment.
Proper placement of bit lights under LEGO pieces, ensuring the LED component is exposed correctly.
How to verify CR2032 battery installation in a flat battery pack for proper operation.
Guide to checking CR2032 battery orientation in a round battery pack for correct functioning.
Instructions for verifying AA battery installation and orientation in the battery pack.
Advice on inspecting wires for detachment, pinching, or short circuits to ensure light functionality.
How to inspect ports for bent pins or short circuits, critical for system functionality.
To Next Page