This document is an installation guide for a Light My Bricks light kit designed for the LEGO® Avengers Tower #76269. It provides detailed instructions, package contents, and troubleshooting tips to help users install the LED lighting system into their LEGO model.
Function Description:
The Light My Bricks kit is an aftermarket accessory that adds LED lighting to the LEGO® Avengers Tower #76269. Its primary function is to enhance the visual appeal of the LEGO model by illuminating various sections, creating a more dynamic and realistic display. The kit includes different types of lights, such as strip lights, bit lights, and a rotating light ring, along with expansion boards and connecting cables to power and control the lighting elements. The installation process involves carefully integrating these components into the existing LEGO structure, often requiring temporary disassembly and reassembly of parts.
Important Technical Specifications (derived from package contents and instructions):
Light Components:
- White Strip Light: 9 units, used for general illumination.
- Cool White Headlight 30cm: 2 units, likely for specific spotlighting or exterior details.
- Rotating Light Ring 8x8 - Orange: 1 unit, designed to create a dynamic, rotating light effect.
- Flashing Red 30cm Bit Light: 1 unit, for warning lights or specific effects.
- Light Blue 30cm Bit Light: 3 units, for accent lighting.
- Light Blue 30cm Large Bit Light: 7 units, for larger areas of light blue accent.
- Yellow 30cm Bit Light: 6 units (includes spares), for yellow accent lighting.
- Black Lamp Post with Bit Light Installed: 1 unit, a pre-assembled lighting element.
Connecting Components:
- 15cm Connecting Cable: 6 units, for short-distance connections.
- 30cm Connecting Cable: 4 units, for medium-distance connections.
- 50cm Connecting Cable: 5 units (includes spares), for longer-distance connections.
Expansion Boards:
- 2-Port Expansion Board: 1 unit, for connecting multiple lights.
- 6-Port Expansion Board: 2 units, for connecting multiple lights.
- 8-Port Expansion Board: 1 unit, for connecting multiple lights.
- 12-Port Expansion Board: 1 unit, for connecting multiple lights.
Power Source:
- USB Power Cable: 1 unit (power source not included), indicating the kit is powered via USB. Users will need to provide a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack (sold separately).
LEGO® Bricks/Plates (included for integration):
- Plate, Round 1x1 with Open Stud - Black: 10 units.
- Plate, Round 1x1 with Open Stud - White: 1 unit.
- Plate, Round 1x1 - Trans Orange: 1 unit.
- Plate, Round 1x1 - Trans Red: 1 unit.
- Plate, Round 2x2 with Rounded Bottom (Boat Stud) - Trans Clear: 1 unit.
- Cone 1x1 with Top Groove - Trans-Black: 2 units.
- Tile, Modified 1x1 with Open O Clip - Black: 2 units.
- Arm Skeleton, Bent with Clips (Horizontal Grip) - Black: 6 units.
- Plate, 1x1 - Light Bluish Grey: 2 units.
- Plate, 1x2 - Light Bluish Grey: 2 units.
- Plate, Round 1x1 with Bar Handle - Black: 4 units.
- Tile 1x2 - Light Bluish Grey: 2 units.
- Plate 1x1 - Trans Light Blue: 6 units.
- Tile 1x2 - Trans Light Blue: 2 units.
- Plate, Modified 1x2 with Bar Handle on End - Black: 6 units.
- Plate, Modified 1x2 with Bar Handle on Side Closed Ends - Black: 4 units.
- Tile 1x6 - Light Bluish Grey: 2 units.
- Plate 1x6 - White: 1 unit.
- Plate 1x6 - Dark Bluish Grey: 8 units.
- Adhesive Square: 2 units, for securing components.
Usage Features:
The installation guide emphasizes careful handling of components due to their small size and delicate nature. It provides clear symbols for various actions:
- Connect: Indicates where to connect LEGO pieces or Light My Bricks components.
- Disconnect: Indicates where to remove LEGO pieces or Light My Bricks components.
- Directional: Shows where to route cables, place components, or move parts.
- Bend/Pivot: Used when a component needs to be bent, folded, or pivoted.
- Turn/Flip: Indicates when the LEGO set needs to be rotated or flipped.
- Twist/Braid: Seen when cables need to be grouped and twisted together.
- Power On Test: Located at the end of major steps to test the lights, ensuring proper functionality throughout the installation.
- Note: Provides additional information or warnings for specific steps.
- Repeat Step: Indicates when a previous step needs to be repeated.
- Focus indicators (Connect, Disconnect, General): Highlight hard-to-see areas or components that need attention.
- Removed Pieces: Shows parts that should be set aside from the original LEGO set.
The guide is structured with numbered steps, each accompanied by multiple images illustrating the process. It advises users to lay cables comfortably between LEGO studs, avoiding forceful connections that could damage cables or lights. Connectors for expansion boards and strip lights must be inserted in the correct orientation, with exposed wires facing the "=" symbol on expansion board ports or facing down for strip lights. Micro connectors require careful insertion, often using a fingernail to push the plastic part into the micro port. Bit lights should be placed with the yellow LED component exposed, either directly on top of or between LEGO studs.
Maintenance Features (Troubleshooting):
The troubleshooting section addresses common issues:
- Battery Check: Users are instructed to first check if the batteries (for the USB to AA Battery Pack, if used) have power and are inserted correctly, matching the polarity symbols inside the battery pack.
- Wiring Check: Emphasizes that Light My Bricks components are small and delicate. Users should avoid forcibly pulling wires, as this can damage soldering. It also warns against pinched wires between LEGO bricks and plates, which can cause a "crosswire" (short circuit) and prevent lights from functioning correctly.
- Expansion Board/Strip Light Port Check: Connectors must be inserted in one direction only. Incorrect insertion can bend pins inside the ports, leading to non-functional lights or, in severe cases, a short circuit. A short circuit can cause overheating of the board, cable, or batteries, potentially leading to battery failure, fire, or even explosion if left connected. Users are advised to visually inspect ports for bent pins and to try different ports to isolate faulty components. If a short circuit is suspected, power should be disconnected immediately.
The guide encourages users to refer to an online troubleshooting video for further assistance. It also provides contact information for customer support.
Need help?
General
To Next Page