INSTRUCTIONS 19
DIRECTIONAL
CONNECT
DISCONNECT
TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO
®
HARRY POTTER HOGWARTS EXPRESS & HOGSMEADE STATION 76423 LIGHT KIT INSTALL GUIDE
14
NOTE
Place the expansion board
as shown, then run the cable
up under the grey plate and
reconnect it.
If you experience any issues with the
lights not working and suspect an issue
with a component, please try a dierent
port on the expansion board to verify
where the fault lies (with the light or
expansion board). To correct any issues
with expansion board ports, please view
the section addressing expansion board
issues in our troubleshooting section.
!
!
NOTE
Connect to a 5V USB Power
Bank, 5V USB Wall Adaptor, or
USB to AA Battery Pack (sold
separately)
USB Power Cable