LIGHT MY BRICKS 76956 - Page 20

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
USB Power Cable
30cm Connecting Cable
Pull USB Cable to
the back.
13
Twist the cables
but ensure to leave
enough slack so the
6-Port Expansion
Board can reach the
middle spotlight.
Pull all the
unconnected cables
minus the USB Power
Cable towards the
front of the set before
reconnecting the
fence .