LIGHT MY BRICKS LEGO LOOP COASTER User Manual

LEGO LOOP COASTER 10303 LIGHT KIT INSTALL GUIDE
v
PACKAGE CONTENTS 3
PACKAGE CONTENTS:
ASSORTED BRICKS:
21 x White 30cm Bit Light*
1 x Cool White 30cm Bit Light
1 x Red & Blue 15cm Bit Light
1 x Orange & Green 15cm Bit Light
2 x Rotating Bit Light
12 x Warm White 30cm Large Bit Light*
3 x Cool White 30cm Large Bit Light
2 x 2-Port Expansion Board
8 x 6-Port Expansion Board
2 x 8-Port Expansion Board*
1 x Gun Eects Board
2 x Rotating Sequence Eects Board
20 x Adhesive Squares
• 15 x Round Plate 1x1 w/ Open Stud – Black
• 13 x Mod Plate 1x1 w/ Handle – Black
• 10 x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
• 13 x Plate 1x2 MW Handle On End - Black
• 3 x Arm Skeleton, Bent with Clips at 90 degrees - Black
• 1 x Round Brick 1x1 - Trans Red
• 2 x Round Plate 1x1 - Trans Red
• 1 x Round Plate 1x1 - Trans Dark Blue
• 1 x Round Plate 1x1 - Trans Green
• 1 x Round Plate 1x1 - Trans Pink
• 1 x Round Plate 1x1 - Trans Clear
• 2 x Plate 2x8 - Black
• 1 x Plate 2x2 W Rounded Bottom - Trans Clear
• 1 x Cone 1 x 1 w/ Top Groove - Trans Orange
• 1 x Bracket 1x1 - Light Grey
4 x 5cm Connecting Cable*
2 x 15cm Connecting Cable
7 x 30cm Connecting Cable
3 x 50cm Connecting Cable*
1x USB Power Cable
(Power Source not Included)
* Indicates components which include spares

LIGHT MY BRICKS LEGO LOOP COASTER Specifications

General

Brand	LIGHT MY BRICKS
Model	LEGO LOOP COASTER
Category	Lighting Equipment
Language	English