EasyManua.ls Logo

Light4Me JET 2000 - Technical Specification

Light4Me JET 2000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Location
Select a location where it is easy to fill the tank. It is also possible to hang the unit by means of the
supplied holder and fixing screws.
Switching the unit off
Switch the unit off by unplugging it from the mains. Otherwise the 1500W heating element will
draw unnecessarily current.
CLEANING
Run clean procedure in a well-ventilated area
- Remove smoke liquid from the tank, add cleaning solution to tank
-Switch smoke machine and wait until it is warm up
-Press the button to switch the liquid pumped through the machine
-Perform the above operation until the tank is empty
-Fill the tank with liquid smoke
TECHNICAL SPECIFICATION
Power Supply: AC110-240v 50/60HZ
Heater: 2000W
Smoke volume per minute: 530m3
Heat up time: 4 minutes
Tank capacity: 2.5 L
No. of colors: 3 (Red, Green, Blue)
No. of LEDs: 24x 3W 3-in-1
DMX channels: 7
LCD remote control with timer function
Vertically and horizontally to use
Red, Green or Blue LED color control by DMX or stand alone
Digital display to set DMX functions and stand-alone settings easy
Wired remote control, cable length 4m
Dimensions: 450 x 310 x 210mm
Weight: 7.9 KG
WARNING! THE DEVICE MUST NOT BE DISPOSED OF WITH HOUSEHOLD WASTE.
This symbol indicates that this product must not be disposed of with household waste, ac-
cording to the EU and your national law. In order to prevent potential damage to the envi-
ronment or health, the used product must be recycled. In accordance with current legisla-
tion, unusable electrical and electronic devices must be collected separately at the designated fa-
cilities for recycling, acting on the basis of applicable environmental standards.

Related product manuals