Light4Me SPARK V2 - 3.2 Wireless Controller Instruction; 4. Operational Details and Instructions; 4.1 Basic Operational Prerequisites; 4.2 Menu Control Panel Operation

3.2 W-8+W-3 wireless controller instruction
When machine ready to spark out, the ready led will glow .There are 3 Channels (Dip Switches)
When use remote controller: The spark height
depends on the setting of Volume Out xxx% on the
display screen.
4.Operational details and instructions
4.1 Basic Operational Prerequisites
1. In order to better maintain the machine, the duration of each continuous sparkling is limited to 8
minutes. Please turn off the power after sparkling 8 minute. Let the machine cool for 5 minutes before
it works.
2. The height of the spark-jet part of the machine can be adjusted. In order to stabilize the machine
and protect the environment.
3. When you don't use the machine for a long time, in order to keep the powder from dampness,
please pour out the powder and keep it sealed for reserve.
4. When working, be sure to lock the inlet and outlet, otherwise it may cause the fire of dancing
powder.
4.2 menu control panel operation:
Menu keys: you can enter menu items, press OK to enter settings, press Increase, Reduce keys to adjust
settings
Button
Function
1
Spark effect on
2
Spark effect off (press for 10 seconds to active cleaning function)
3
10 seconds spark
5
20 seconds spark.
7
30 seconds spark.
4
Sparkeffect on group1 (Receiver = 1)
6
Sparkeffect on group2 (Receiver =2)
8
Sparkeffect on group3 (Receiver =3)