Introduction
I
1\11\1
DV
ATE
DR
DI!iII\lTE6RATE
Thank you for purchasing the Lightning Audio Amplifier.
Our customers have come
to
expect that Lightning Audio pushes the edge
in
audio.
Now
we will
push the edge
in
the amplifier and woofer business with high value and high performance mod-
els.
If,
after reading your manual, you still have questions regarding this product, we recommend
that you see your Lightning Audio dealer. If you need further assistance, you can call us direct
at 1-888-881-8186. Be sure
to
have your serial number, model number and the dated proof of
purchase available when you call.
The serial number can be found on the outside of the box. Please record it
in
the space provided
below
as
your permanent record. This will serve
as
verification of your factory warranty and may
become useful
in
recovering your amplifier if it
is
ever stolen.
Serial Number:
Model Number:
Table
of
Contents
Introduction 2
Safety Instructions 2
Design Features
3
Installation 4-7
Installation Considerations 4
Mounting Locations 4
Battery and Charging 5
Wiring the System 5
Using Passive Crossovers 7
Operation
8
Adjusting Gain 8
Adjusting Crossover (X-Over) 8
Troubleshooting
8
Specifications 8
Limited Warranty Information 9
International
Instructions
10
LhWARNING
NOTE: Review each section for more detailed information.
Safety
Instructions
This symbol with "WARNING" is intended
to
alert the user to
the presence of important instructions. Failure to heed the
instructions will result
in
severe injury
or
death.
LhCAUTION
This symbol with "CAUTION"
is
intended to alert the user to
the presence of important instructions. Failure to heed the
instructions can result
in
injury or unit damage.
~
CAUTION:
~
CAUTION
~
CAUTION
2
To
prevent injury and damage to the unit, please read and follow the
instructions
in
this manual.
We
want you to have enjoyment from this
system, not a headache.
If you feel unsure about installing this system yourself, have it
installed by a qualified Lightning Audio technician.
Before installation, disconnect the battery negative
(-)
terminal to pre-
vent damage
to
the unit, fire and/or possible injury.
To Next Page
Loading...