Congratulations on purchasing your new DMX distributor. The unit has two input and
eight output. Absolutely electric isolation between input and output or between
output and output. Two type of DMX connector(3pin)for each individual channel,
each DMX output features a independent driver. we strongly recommend that you
take time to read this manual fully before you attempt to use the DMX distributor .
Operating Instructions:
DMX output : connect to the DMX receiving device
DMX input : from the DMX transmitting device
Please Notice: Receiver can not more than 32 units on one out channel.
Use one terminator on the last receiver.
To Next Page
Loading...
Need help?
General
