Lightmaxx Vector Haze 1.7 - Setup and Controls; Initial Setup; Device Controls Overview

ENGLISH
Set up:
Connect the product to the power supply and then turn it on. Wait until the heating element has
reached the operating temperature. The control is now carried out either by DMX, remote control
or by operation on the device itself.
Display and menu buttons:
The device has 4 operating keys and an LCD display on which
all settings can be addressed and read.
Button
Function
Description
Interval Set
(5-200sec)
Duration Set
(5-200sec)
Timer-mode-setting
Timer Out
(1-100%)
Menu
Volume Out
(1-100%)
Fan Speed
(1-100%)
DMX Add
(001-512)
Fluid sensor on/off
Timer/
Up
Up/Activate Timer function
Volume/
Down
Down/Activate Volume
function
Stop
Stop/Exit