Lightmaxx Vector Haze 1.7 - Operating Modes; Timer Mode Operation; Volume (Continuous Mode) Operation

ENGLISH
Timer Mode
In the timer mode, the fog machine will automatically emit fog. The time intervals, duration and
fog volume depend on the corresponding menu settings. Press the TIMER button, to activate the
timer mode. The display indicates the set time interval:
Interval xxx s
The unit counts down to 0 seconds and emits fog. To deactivate the timer mode, press the Stop
button.
Volume (Continuous Mode)
Press the VOLUME button, to activate continuous fog output. The display indicates Volume
followed by the value that was set in menu item “Volume Out”:
Duration xxx s
To stop the fog output, press the Stop button.