EasyManuals Logo

Lightmaxx VECTOR Spot 200 User Manual

Lightmaxx VECTOR Spot 200
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
DEUTSCHENGLISH
Cleaning:
Regular cleaning of the device from impurities and dust increases the shelf life of the product. Always
disconnect the device from the power supply while cleaning it Optical lenses should be cleaned with
a dry microfiber cloth. This will also optimize the light output. Never clean the device wet! Ventilation
grilles and openings should always be cleaned of dust and dirt. Compressed air sprays are ideal for this
application.
Environmental protection:
The company Music Store professional GmbH always strives to reduce the burden of packaging to a mi-
nimum. The use of environmentally friendly and recyclable materials is always of elementary importance.
Please return the packaging for recycling after use:
Troubleshooting:
Note! (Error during data transmission)
Never connect the DMX input or output to audio devices!
DMX cables enable trouble-free operation and the highest possible trans-
mission reliability of signal data. Do not use microphone cables.
The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
Symptom Troubleshooting
No function Check the mains connection and its fuse.
No reaction in DMX mode Check the cable connections.
If available, try an alternative DMX controller.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lightmaxx VECTOR Spot 200 and is the answer not in the manual?

Lightmaxx VECTOR Spot 200 Specifications

General IconGeneral
BrandLightmaxx
ModelVECTOR Spot 200
CategoryDJ Equipment
LanguageEnglish

Related product manuals