Lightmaxx VECTOR Spot 200 - Operation; Connections and Controls

DEUTSCHENGLISHFRANCAISESPAÑOL
26
Connections and controls:
DEUTSCHENGLISH
Operating mode Auto or Sound:
The device contains automatic programs that run according to fixed patterns (Auto) or are recalled
via the built-in microphone to match the music (Sound). The selection of the respective mode is
made via the menu directly on the device.
Operation:
Start:
Connect the device to the mains and wait a few seconds until it is ready for operation.
1 Lense 6 DMX Output (3 pin)
2 Display 7 ON/OFF switch
3 Menu keys 8 Power Input (PowerCon compatible)
4 Carrying handle 9 Power Output (PowerCon compatible)
5 DMX Input (3 pin) 10 Fuse