3
1) Normal Operation: Turn the Ionization dial on and
select fan speed. The unit should be located at least two to
three feet off the floor and at least three feet away from
sitting and sleeping areas.
2) Sanitizer Mode: The O
3
Sanitizer is most effective in
unoccupied spaces to eliminate odors and significantly
reduce mold and mildew. Close all doors and windows in
the space to be treated. Turn Sanitizer dial on and select
square feet setting. Vacate the space for 1 to 4 hours de-
pending upon the severity of the odors. Return to space,
turn Sanitizer dial off, open doors and outside windows
until sanitizing smell is gone.
Warning: Excess ozone (O
3
) concentrations can cause
mucous membrane and respiratory irritation. If you detect
the sanitizing smell when you walk into the room turn the
Sanitizer dial off or down to a lower level.
QUICK START
Read
ALL instructions and information contained in this
product guide before using this product.
To Next Page
Loading...