Lightspeed Rocket Hardware Installation Guide 13
ID
1
2
3
4
See Detail Illustration and Chart
for Front Panel Information
USB Ports
Video Port
for Fr
See Detail Illustration and Chart
ideo PortV
USB Ports
mation ont Panel Inforfor Fr
See Detail Illustration and Chart
System
Status LED
A B C D E F G
H I
ABCD
HI
Status LED
System
EF G
A System ID Button with integrated LED
B NMI Button (recessed, tool required for use)
C NIC 2 Activity LED
D NIC 4 Activity LED
E System Cold Reset Button
F Hard Drive Activity LED
G Power Button with integrated LED
H NIC 1 Activity LED
I NIC 3 Activity LED
System Status LED
There is a bi-color (Green/Amber) LED on the Front Panel (shown on
the left). The LED operation is defined in the following table.
Criticality
Not ready
OK
Degraded - system is
operating in a degraded
state although still functional,
OR system is operating in a
redundant state but with an
impending failure warning
Non-critical - system is
operating in a degraded
state with an impending
failure warning, although
still functioning
Critical, non-recoverable -
system is halted
LED Color
OFF
GREEN
GREEN
AMBER
AMBER
System State
System is not operating
Solid - On
~1 Hz blinking
~1 Hz blinking
Solid - On
By powering on the appliance you agree to all terms and conditions included in the End User
License Agreement (EULA) located at
http://www.lightspeedsystems.com/eula/
Power on the appliance
n
Press the power button located on the far right on the front side of the appliance.
7. Front Panel Operation
To Next Page
Loading...