What to do if changing EDID on Lightware DA2DVI-DL Amplifier doesn't change resolution?
If you've changed the EDID on an input port of your Lightware Amplifier to get a different resolution and nothing happens, you need to restart your source. This forces the source to read the EDID again.
General| Input Ports | 1 x DVI-D |
|---|---|
| Output Ports | 2x DVI-D |
| HDCP | Yes |
| Power Supply | 5V DC |
| Type | DVI Distribution Amplifier |
| Max. Resolution | 1920x1200 |
| Bandwidth | 6.75 Gbps |
Guidance on safe operation, power disconnection, and avoiding exposure to internal voltages.
Guide to installing the LDC software and performing firmware updates for the device.
Details on configuring output ports and accessing the advanced EDID menu.
Guide to learning, exporting, importing, and deleting EDID data using the LDC software.
Details commands for saving, viewing, and managing EDID data.
Commands for deleting, downloading, and uploading EDID content to the device.
Guide to updating the device's firmware using the bootloader software.
Explains EDID, its role in display communication, and advanced management features.
Lists detailed technical data, compliance, power, and connectivity of the DA2DVI-DL.
To Next Page