Q. How do I know if I have the latest firmware?
A. The Lightwave Link will automatically check for firmware updates
several
times a day and on boot up. There is no need to manually update
this.
Q. Does the Lightwave Link require a static IP address?
A. Our system uses the MAC address of the Lightwave Link for remote
commands and as such does not require you to have a static IP. The system
will work with or without a static IP address.
Q. How much power does the Lightwave Link use?
A. 3W (approximatly).
Q. Can I set the time manually?
A. No. This is set by checking with an internet NTP Server.
Q. How many devices can I have on the Lightwave system?
A. Each device has 6 memory slots for up 6 controllers (one of these can be
the Lightwave Link allowing multiple smartphones to control up to 240 devices.
Q. Which ports does the Lightwave Link use?
A. The Lightwave Link operates on ports 69 & 2011 on UDP for remote
connectivity and 9760 & 9761 for local connectivity.
FAQs
To Next Page
Loading...