What do I need?
How do I get started?
The relay is designed to remotely turn on/o
lighting or power circuits (max 500W) or to
control door, window or curtain openers. You must
understand how your devices need to be wired
and how to safely turn o the electricity supply.
You will also need suitable electrical screwdrivers.
Please refer to the following installation and
setup instructions that will guide you through
the installation and setup process.
Help video & further guidance
For additional guidance, and to watch a video
that will help guide you through the installation
process, please visit the support section on
www.lightwaverf.com
Get Started
To Next Page
Loading...