LightwaveRF JSJS LW100 - Operation; ON;OFF Receiver Operation

4. The handset LED will ash for 3 seconds.
5. The Handset will then send a ‘store mood’ code to
all paired receivers, which will ash to show
conrmation.
OPERATION :
1) Linked to an ‘ON/OFF’ receiver (eg Room
Control single, double or plug-in sockets):
‘ON’ Button - Press once to switch ‘ON’.
‘OFF’ Button - Press once to switch ‘OFF’.
‘ALL OFF’ Button - Press once to switch o all paired
receivers at the same time.
!