The Limitless PhoneStation is a universal phone mount designed for use in vehicles, offering both cup holder and air vent mounting options. It is intended to securely hold mobile devices while driving, though the manufacturer strongly advises against using mobile devices while operating a vehicle.
Function Description:
The PhoneStation serves as a versatile mounting solution for smartphones in a car. It allows users to position their device in a convenient and accessible location, either within a cup holder or attached to an air vent. The mount features adjustable arms and an adjustable foot to accommodate various phone sizes, ensuring a snug and secure fit. The flexible neck of the cup holder base allows for easy adjustment of the phone's viewing angle, while the air vent clip provides a compact mounting alternative.
Important Technical Specifications:
- Minimum Arm Opening: 2 inches
- Maximum Arm Opening: 3.5 inches
- Minimum Cup Holder Diameter: 2.25 inches
- Maximum Cup Holder Diameter: 3.25 inches
- Foot Adjustment: 1 inch
Usage Features:
Installing the PhoneStation (Cup Holder Base):
- Place the Socket Cap on the Ball Joint Socket on the back of the Phone Mount and turn clockwise, but do not fully tighten yet.
- Insert the Ball Joint at the end of the Flexible Neck into the Ball Joint Socket of the Phone Mount.
- Turn the Socket Cap clockwise until snug. The Phone Mount should be able to rotate with applied pressure only at this stage.
- With the Locking Inserts fully retracted into the Cup Holder Base, place the base into the desired cup holder.
- Turn the Locking Insert Adjustment Dial clockwise to expand the Locking Inserts, securing the base tightly within the cup holder.
- Adjust the Phone Mount to the desired position, then fully tighten the Socket Cap clockwise to secure the Phone Mount in place.
Installing the PhoneStation (Air Vent Clip):
- Place the Socket Cap on the Ball Joint Socket on the back of the Phone Mount and turn clockwise, but do not fully tighten yet.
- Insert the Ball Joint of the Air Vent Clip into the Ball Joint Socket of the Phone Mount.
- Turn the Socket Cap clockwise until snug. The Phone Mount should be able to rotate with applied pressure only at this stage.
- With the Locking Lever in the vertical position, slide the Air Vent Clip onto an air vent fin.
- Flip the Locking Lever to the side to tighten the Vent Clips.
- For larger vents, use the "I" position.
- For smaller vents, use the "II" position.
- Adjust the Phone Mount and Flexible Neck (if applicable with the cup holder base) until the desired positioning is achieved. Turn the Socket Cap clockwise until tightened and the Phone Mount is secured in place.
Adding a Device:
- Press and hold the Adjustable Arm Release Button on the top-back of the PhoneStation Mount until the arms are fully expanded.
- Press and hold the Adjustable Foot Release Button on the bottom-back of the Phone Mount and pull/push the foot to the desired position to support the device.
- Place a mobile device on the Adjustable Foot and against the back of the PhoneStation Mount.
- Close the Adjustable Arms by squeezing them inward until the device is securely held by the Phone Mount.
Removing a Device:
- To remove the device, press and hold the Adjustable Arm Release Button on the top-back of the Phone Mount until the arms are fully expanded, then remove the device.
Safety Warnings:
- Keep the PhoneStation and all accessories out of reach of small children.
- Do NOT attempt to open or modify the PhoneStation, as this will void the warranty.
- Do NOT force a device between the arms or remove a device without using the Release Button to open the arms.
- Limitless Innovations strongly advises against using mobile devices while driving. Drive safely.
- If a minor uses the device, the purchasing adult is responsible for supervision, instruction, and warnings, and agrees to indemnify Limitless Innovations for any claims or damages from unintended use or misuse by a minor.
Maintenance Features:
The manual does not explicitly detail maintenance features. However, it is implied that the device should be kept clean and free from liquids, dirt, and extreme temperatures to ensure proper function and longevity. Any unauthorized service or modification will void the warranty.
Limited Warranty:
Limitless Innovations, Inc. provides a one (1) year Limited Warranty from the date of original purchase, covering defects in materials and workmanship under normal consumer usage. This warranty is the consumer's sole and exclusive remedy for express warranty claims.
Exclusions to the Limited Warranty:
- Normal Wear and Tear: Does not cover maintenance, repair, or replacement due to normal wear and tear.
- Abuse and Misuse: Does not cover defects or damage from improper operation, storage, misuse, abuse, accident, neglect (including physical damage, cracks, scratches), contact with liquids, extreme humidity, sand, dirt, extreme heat, food, commercial use, abnormal usage, or other acts not solely the fault of the Limitless product.
- Unauthorized Service or Modification: Does not cover defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification by anyone other than Limitless or its authorized service centers.
- Altered Products: Does not cover defects or damages to products with removed, altered, or obliterated serial numbers or date tags; broken seals or evidence of tampering; mismatched board serial numbers; or non-conforming housings or components.
- Communication Services: Does not cover defects, damage, or failure due to communication service or signal used with the product or software.
Who is Covered:
The warranty extends only to the first consumer purchaser and is not transferable.
What Limitless Will Do:
If a claim is subject to the Limited Warranty, Limitless will, at its discretion, repair or replace the product, or refund the purchase price. Replacements may be functionally equivalent reconditioned, refurbished, pre-owned, or new products or parts.
Contact the support team at LimitlessInnovations.com/Support or call (855) 843-4828 to obtain an RMA (Return Merchandise Authorization) number before mailing the product. Include a copy of the receipt, a written description of the problem, the service provider's name (if applicable), and mailing/email address and phone number. Shipping costs to the repair center are the consumer's responsibility.
Other Limitations:
Warranty claims are limited to the cost of materials for the defective product. Limitless is not liable for labor costs or any other direct, indirect, consequential, incidental, or special damages, whether in contract or tort. The performance of the product depends on adherence to instructions. Some states do not allow exclusions or limitations of incidental or consequential damages or limitations on implied warranty duration. All implied warranties (merchantability, fitness for a particular purpose) expire one year from the date of first purchase.
National Statutory Rights:
Consumers may have legal rights under national legislation (e.g., EC Directive 99/44) which are not affected by this Limited Warranty.
For full Warranty, Terms, and Conditions, visit LimitlessInnovations.com/Warranty.
Need help?
General
To Next Page