SMB/SB Installation and Maintenance Manual 140-11000 • July 2003II
Flow Control Division
Limitorque Actuation Systems
SMB/SB Series Installation and Maintenance Manual
©2003 Copyright Limitorque. All rights reserved.
Printed in the United States of America.
Disclaimer
No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or
otherwise without the written permission of Limitorque. While every precaution has been taken in the preparation of this book, the publisher assumes no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
This document is the proprietary information of Limitorque, furnished for customer use ONLY. No other uses are authorized without written permission
from Limitorque.
Limitorque reserves the right to make changes, without notice, to this document and the products it describes. Limitorque shall not be liable for technical or
editorial errors or omissions made herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this document.
This manual contains information that is correct to the best of Limitorque’s knowledge. It is intended to be a guide and should not be considered as a sole
source of technical instruction, replacing good technical judgment, since all possible situations cannot be anticipated. If there is any doubt as to exact
installation, configuration, and/or use, call Limitorque at (434) 528-4400.
The choice of system components is the responsibility of the buyer, and how they are used cannot be the liability of Limitorque. However, Limitorque’s
sales team and application engineers are always available to assist you in making your decision. The latest revisions to this document are available online at
http://www.limitorque.com.
To Next Page
Loading...
Need help?
General
